Wood drill / countersink

FAMAG 1005.622 Formwork Drill Bit, SDS-Plus Shank, Ø 22 mm Boarding and Plumbing Auger, SDS-plus shank, Ø=22mm, Length=600mm

For drilling of external and internal form boards in one single operation. Also for drilling in wooden ceilings and floors for installation work in old-building renovation

Twist drill with long shank (SDS-plus) and specially ground rooflike tip wh

60,94 €/piece
incl. tax, plus shipping

More information

FAMAG 3510.012 Flat Centre Bit, Ø 12 mm Machine Flat Bit, Ø=12mm

For drilling in soft wood without any particular precision and quality. Due to the taper taps the results are clearly better than the usual versions

Classical centre bit with brad point. Polished face with two roughing taps and bit shank. The exten

3,64 €/piece
incl. tax, plus shipping

More information

FAMAG 1624.035 Bormax® 2.0 Prima (Pilot Guided), Ø 35 mm Pilot guided Bormax®, Ø=35mm

The pilot-drill bit is ideal for drilling at an angle which is not 90° in workpieces surface, which occurs for example in the construction of staircase. Can be used with the centre point as traditional Bormax

Bormax with exchangeable brad point, al

49,65 €/piece
incl. tax, plus shipping

More information

FAMAG 1410.136 Auger Bit, Lewis Pattern, Ø 36 mm Auger Bit, Lewis pattern, Ø=36mm

For drilling deep holes in soft wood and European hard wood with power drill and joinery machine. < Ø 24 mm can also be used with cordless screw driver

Lewis pattern, milled version relief ground by robots, screw threading centre point, main edge

178,32 €/piece
incl. tax, plus shipping

More information

FAMAG 1540.003 Machine Expansive Bit, Ø 22 - 100 mm Expansive Bit for machine, Ø=22 - 100 mm

For drilling in soft wood, universal for all diameters and intermediate sizes

Version with brad point, one fixed main edge and adjustable knife with roughing tap. Expansive bit with stable parallel shank 13 x 50 mm

135,11 €/piece
incl. tax, plus shipping

More information

FAMAG 1591.180 Brad Point Drill Bit, HSS, Ø 18 mm

For accurate drillings in soft wood, European hard wood, chipboards as well as MDF panels. Ideal use with cordless screwdriver in soft wood

29,83 €/piece
incl. tax, plus shipping

More information

FAMAG 3491.008 Brad Point Drill Bit, CV, Long Version, Ø 8 mm Machine Drill long, Ø=8mm

='[GB_200713.xlsx]3491'!$D$221

With brad point, two main edges and protruding cutting edges

9,42 €/piece
incl. tax, plus shipping

More information

FAMAG 1622.048 Bormax® 2.0, Forstner Bit, Ø 48 mm Bormax®, Forstner bit, Ø=48mm

Rapid drilling in soft wood, European hard wood, chipboard, MDF etc. Rapid chipping of solid wood and chipboards. Clearly less effort is needed and boring is more rapid than with the usual Forstner bit

Forstner Bit with wave-form cutting teeth, two

67,90 €/piece
incl. tax, plus shipping

More information

FAMAG 3537.004 Countersink , Ø 4 mm Shell Drill-Countersink Hobby, Economy, Ø=4mm, Length=20mm

Drilling and countersinking in one single operation. For clipping on drill bits with the appropriate Ø. Very suitable for soft wood

Shell drill countersink with 5 edges and point angle 90° to clip on machine drills. For do-it-yourself people

7,07 €/piece
incl. tax, plus shipping

More information

FAMAG 1594.080 Brad Point Drill Bit, HSS-G, Ø 8,0 mm Machine Drill with brad point and cutting lips, HSS, Ø=8,0mm

For exact drilling in all, particularly hard materials. Also suitable for some plastics, like acrylic glass, Corian®, GFRP, HPL coating, polycarbonate, PVC and Trespa® board. Specially designed flutes ensure a very good chip removal

Premium version

9,59 €/piece
incl. tax, plus shipping

More information

Cookies setting