Wood drill / countersink

FAMAG 1403.322 Drill Rig, Fixed Version, Ø 320 mm Drill Rig for Auger Bits, rigidly coupled version, 320mm

Precise drilling in exact 90° setting angle. Additional guidance of the drill bits by drill bushing plate. Easy back stroke of the power drill by spiral springs.1402.000: mountable on all FAMAG drill rigs with square foot

With additional handle, tw

343,00 €/piece
incl. tax, plus shipping

More information

FAMAG 1661.100 TCT-Cylinder Boring Bit, Long Version, Ø 100 mm SUPER-Cylinder Boring Bit, carbide-tipped, long, Precision, Ø=100mm

Tear free, accurate drillings in all hard wood materials, laminated and plastic laminated chipboards, as well as many plastics, such as acrylic glass, Corian, GFRP, HPL coating, polycarbonate, PVC and Trespa board. For stationary use only

Long ver

623,17 €/piece
incl. tax, plus shipping

More information

FAMAG 1410.138 Auger Bit, Lewis Pattern, Ø 38 mm Auger Bit, Lewis pattern, Ø=38mm

For drilling deep holes in soft wood and European hard wood with power drill and joinery machine. < Ø 24 mm can also be used with cordless screw driver

Lewis pattern, milled version relief ground by robots, screw threading centre point, main edge

244,14 €/piece
incl. tax, plus shipping

More information

FAMAG 1493.426 Auger Bit for Hard Wood, Ø 26 mm Auger bit for hardwood, Ø=26mm

For drilling deep holes in all hard woods and also in Bongossi

Lewis pattern with rough brad point, main edge and underknife

85,36 €/piece
incl. tax, plus shipping

More information

FAMAG 1622.019 Bormax® 2.0, Forstner Bit, Ø 19 mm Bormax®, Forstner bit, Ø=19mm

Rapid drilling in soft wood, European hard wood, chipboard, MDF etc. Rapid chipping of solid wood and chipboards. Clearly less effort is needed and boring is more rapid than with the usual Forstner bit

Forstner Bit with wave-form cutting teeth, two

29,77 €/piece
incl. tax, plus shipping

More information

FAMAG 1621.010 Depth Stop Supported by Ball Bearing for FAMAG-Forstner Bits , Ø Guide bush I-Ø 10 mm for 1621.100 mm Guide bush I-Ø 10 mm for 1621.100

The depth stop is mounted on the stalk and the drilling depth has to be adjusted. This makes it possible to drill stud holes with exactly the same depth at all times. The bushings are rotatably supported by ball bearings and thus produce no disturbing mar

14,41 €/piece
incl. tax, plus shipping

More information

FAMAG 1662.033 TCT-Cylinder Boring Bit, Ø 33 mm SUPER-Cylinder Boring Bit, carbide-tipped, Precision, Ø=33mm

Tear free, accurate drillings in all hard wood materials, coated and plastic coated chipboards, as well as many plastics, such as acrylic glass, Corian, GFRP, HPL coating, polycarbonate, PVC and Trespa board. Very good chip removal due to serrated grindi

99,50 €/piece
incl. tax, plus shipping

More information

FAMAG 3577.104 Drill Bit - Countersink Set with Rotating Depth Stop , Countersink single I-Ø 4 mm Countersink single Ø 4 mm

This set is particularly well suited for terrace construction. It makes it easy to drill screwholes and to countersink them properly and accurate in the terrace boards. The depth stop is rotatably mounted and stops when it touches the workpiece. This pre

16,34 €/piece
incl. tax, plus shipping

More information

FAMAG 1540.002 Machine Expansive Bit, Ø 22 - 76 mm Expansive Bit for machine, Ø=22 - 76 mm

For drilling in soft wood, universal for all diameters and intermediate sizes

Version with brad point, one fixed main edge and adjustable knife with roughing tap. Expansive bit with stable parallel shank 13 x 50 mm

61,96 €/piece
incl. tax, plus shipping

More information

FAMAG 1594.200 Brad Point Drill Bit, HSS-G, Ø 20,0 mm Machine Drill with brad point and cutting lips, HSS, Ø=20,0mm

For exact drilling in all, particularly hard materials. Also suitable for some plastics, like acrylic glass, Corian®, GFRP, HPL coating, polycarbonate, PVC and Trespa® board. Specially designed flutes ensure a very good chip removal

Premium version

54,41 €/piece
incl. tax, plus shipping

More information

Cookies setting